Warning ⚠️

• Disconnect 24v bus power when flashing nodes
• Disconnect all other devices from the node (only connect USB Type-C)
• Do not disconnect the node during a firmware flash or you risk corruption

Firmware

1. Connect the node you want to flash to the computer using the USB Type-C cable
2. Open Leash app
3. Navigate to the settings tab
4. Confirm the node details are connect
5. Choose a firmware version. Generally, auto mode will automatically select the best firmware file for your hardware.
6. click FLASH
7. After clicking FLASH, be patient. It can take up to a minute for the node to enter the correct mode. The node will automatically restart.
8. confirm node firmware version is updated after it reconnects.